Killer DIY projects you can do at home

Sometimes all we need is a little inspiration to get started on that DIY home project.

Step by step instructional decor projects

Looking to spice up that one room in the house? Search to find your inspiration!

Tip #1 Always select the right tools for the job.

No need to fear the tools you have at home. When used properly you may be suprised what you can accomplish.

Tip #2 Measure twice, cut once.

Keep a close eye on all of your measurements before cutting any material.

Tip #3 Secure your project if at all possible.

Be sure to secure your project if at all possible when working.

Wednesday, November 23, 2016

Inaugural Service World Expo exceeds attendees’ expectations

Check out the cover story, Look the prat, Establish a premium brand experience right from the start. Find out what Meet sustainability goals with water-source heat pumps, and Improvements in food-waste disposers are about.

View More

from Plumbing and Mechanical http://ift.tt/2fsebgi


Advertisement

Sourced by "Home Hacks". Scouring and supporting the art of DIY home projects by sharing links and information provided by numerous active reputable DIY veterans and company's. Any projects you start please be of proper age, follow all required safety measures, and use the required protective equipment when handling any chemicals, power tools, or during any construction project. If you need advice regarding your next project we suggest visiting Contractor Talk.

Monday, November 21, 2016

PHCC's CONNECT 2016 proves everything is 'bigger in Texas'

Check out the cover story, Look the prat, Establish a premium brand experience right from the start. Find out what Meet sustainability goals with water-source heat pumps, and Improvements in food-waste disposers are about.

View More

from Plumbing and Mechanical http://ift.tt/2fxQD7b


Advertisement

Sourced by "Home Hacks". Scouring and supporting the art of DIY home projects by sharing links and information provided by numerous active reputable DIY veterans and company's. Any projects you start please be of proper age, follow all required safety measures, and use the required protective equipment when handling any chemicals, power tools, or during any construction project. If you need advice regarding your next project we suggest visiting Contractor Talk.

How to Find and Buy the Best Walk-In Bathtub Today

Don’t you always look out for a product that will make it easier for you to carry out a task easier and faster? The never-ending search for convenience has led to the best innovations in human life and one of these devices is the walk-in bathtub. The walk-in bathtub was designed for convenience and also for security purposes in the elderly and the young.

For these reasons, you have to find just the perfect walk-in bathtub. But, how do you find this bathtub?

  1. Referrals and recommendations

The first step to finding information or an item is by asking. Your friends, family, or acquaintances could have most of the information you need about where to buy the bestwalk-in bathtub today.

When the words from these parties are inconclusive, you can take it upon yourself and check the online reviews for the products across the market. These reviews will also widen your knowledge on what is in the market and what will work for your home.

  1. Online stores

Have you realized that every time you type ‘how to find a walk in tub’ you find numerous links to online stores selling the tabs? Well, this is because there are several walk-in bathtub stores without stores physically located in your neighborhood. They have their stores online and you will find a wide variety of tubs online.

Since it can be challenging and even complicated to pick one store over the other, you research on the stores further to learn of their authenticity and the quality of their products.

  1. Visit the local retail stores

Most local retailers have showrooms where you can walk in to and ask about the available models for walk-in bathtubs, their prices, and the styles. Since you will get access to several of these stores in your town and the neighboring towns, it is advisable that you make comparisons before buying to ensure that you have the right bathtub for your home.

However pressed you are or impatient you feel, you shouldn’t settle for just any bathtub available on display. Ask if there are other options and don’t settle for a bathtub that won’t work for you.

  1. Installation services

Whether you buy a bathtub online or from your local store, you must ask if the store offers installation services free. It is only fair for the store to install the tub since they know more about the tub and they will take responsibility for any breakage or problems resulting after the installation. When installation services aren’t offered, then you may consider looking for another seller rather than spending more on installation.

  1. Call the retailers to your home

To meet every customer’s needs conveniently, you will find a number of companies offering in-home sales and consultation. If they are from a reputable company, then you can have them over at your home where they will measure the space and also help you choose the best tub to meet your needs.

In conclusion, you will be able to buy the best walk-in bathtub for your loved ones or yourself if you look at these places and find the right people to work with. 


from 411HomeRepair.com http://ift.tt/2fiTMKm


Advertisement

Sourced by "Home Hacks". Scouring and supporting the art of DIY home projects by sharing links and information provided by numerous active reputable DIY veterans and company's. Any projects you start please be of proper age, follow all required safety measures, and use the required protective equipment when handling any chemicals, power tools, or during any construction project. If you need advice regarding your next project we suggest visiting Contractor Talk.

Thursday, November 17, 2016

Following instructions for installing a two-zone system

The Glitch

A schematic, very similar to the one below, appears in a manufacturer’s installation manual. It represents the manufacturer’s recommendation for installing a two-zone system. Can you identify at least five things that could be changed to improve this system?

The Fix

What’s wrong?

1. The zone valves should be located on the supply side of the zone circuits to eliminate heat migration into inactive zone circuits.

2. The tee shown below the zone valves is a “bullhead” tee. When both zones are on, return flows slam directly into each other. This creates turbulence and noise. It also wastes circulator head.

3. There should be at least 12 diameters of straight pipe leading into the circulator. Placing it close to the side port of the bullhead tee allows turbulent flow into the circulator. This decreases circulator performance and creates noise.

4. The circulator in the glitch drawing is pumping toward rather than away from the expansion tank. This causes a decrease in pressure within the zone circuits when their circulators operate.

5. There is no provision for differential pressure control in the original system.

6. There are no purging valves in the original system.

These glitches have been corrected in the fix drawing.

Differential pressure control is managed by a pressure regulated variable speed circulator. It also could be managed by a differential pressure bypass valve in combination with a fixed-speed circulator.


from Plumbing and Mechanical http://ift.tt/2gm2xoJ


Advertisement

Sourced by "Home Hacks". Scouring and supporting the art of DIY home projects by sharing links and information provided by numerous active reputable DIY veterans and company's. Any projects you start please be of proper age, follow all required safety measures, and use the required protective equipment when handling any chemicals, power tools, or during any construction project. If you need advice regarding your next project we suggest visiting Contractor Talk.

Following instructions for installing a two-zone system

The Glitch

A schematic, very similar to the one below, appears in a manufacturer’s installation manual. It represents the manufacturer’s recommendation for installing a two-zone system. Can you identify at least five things that could be changed to improve this system?

The Fix

What’s wrong?

1. The zone valves should be located on the supply side of the zone circuits to eliminate heat migration into inactive zone circuits.

2. The tee shown below the zone valves is a “bullhead” tee. When both zones are on, return flows slam directly into each other. This creates turbulence and noise. It also wastes circulator head.

3. There should be at least 12 diameters of straight pipe leading into the circulator. Placing it close to the side port of the bullhead tee allows turbulent flow into the circulator. This decreases circulator performance and creates noise.

4. The circulator in the glitch drawing is pumping toward rather than away from the expansion tank. This causes a decrease in pressure within the zone circuits when their circulators operate.

5. There is no provision for differential pressure control in the original system.

6. There are no purging valves in the original system.

These glitches have been corrected in the fix drawing.

Differential pressure control is managed by a pressure regulated variable speed circulator. It also could be managed by a differential pressure bypass valve in combination with a fixed-speed circulator.


from Plumbing and Mechanical http://ift.tt/2gliqM7


Advertisement

Sourced by "Home Hacks". Scouring and supporting the art of DIY home projects by sharing links and information provided by numerous active reputable DIY veterans and company's. Any projects you start please be of proper age, follow all required safety measures, and use the required protective equipment when handling any chemicals, power tools, or during any construction project. If you need advice regarding your next project we suggest visiting Contractor Talk.